Kbron Roofing logo
Mon–Sat 6 AM–8 PM · Sun Closed Get Estimate

Metal Roofing in San Antonio Built for Heat and Hail

Standing-seam metal that sheds heat, sheds water, and stands up to hail


Standing-seam metal is the roof that San Antonio summers and hail seasons argue for: it reflects heat instead of holding it, sheds water fast, and takes hail impacts that would bruise shingles. Our metal roofing work installs cut-to-length panels with custom flashing and balanced ventilation. Call (254) 645-5833, Monday to Saturday, 6 AM to 8 PM.

Standing-seam metal roof panels on a modern San Antonio home
San Antonio Roofer Roofing contractor in San Antonio, Texas
5.0 from 18 Google Reviews All 18 Google reviews are 5-star
Mon–Sat 6 AM–8 PM Call Monday to Saturday, 6 AM to 8 PM
Latino-Owned Identifies as Latino-owned and LGBTQ+ friendly

What Our Metal Roofing Includes

Metal roofing is a different trade from shingle roofing, and it is installed as one: the deck, the high-temperature underlayment, the panels, the flashing and the ventilation, each in its turn.

Tear-off and deck inspection

The old roof is torn off and the deck is inspected before any metal goes down, because a metal roof over a soft deck is a metal roof that oil-cans and leaks.

High-temp underlayment

High-temperature underlayment goes across the whole deck, because a metal roof in a 100-degree summer runs hotter than shingles and the underlayment has to take it.

Cut-to-length panels

Panels are cut to length for the roof, so the field has fewer joints and fewer places for water to find, and the seams are closed with a seaming tool, not with sealant.

Custom metal flashing

Flashing is custom-formed in metal for every chimney, wall, valley and penetration, because a metal roof with shingle flashing is a roof that leaks at the transitions.

Ventilation and ridge vent

Ventilation and ridge vent are part of the installation, so the attic breathes and the panels are not cooked from below.

Cleanup and Final Photos

Cleanup and final photos close the job: the debris is hauled off, the yard is magnet-swept, and the finished roof is photographed, seam by seam.

What Metal Roofing in San Antonio Actually Involves


Metal roofing in San Antonio actually involves a standing-seam system: panels cut to length, high-temperature underlayment, custom-formed flashing, and clips that let the panels move with the heat. Metal is growing fastest on the Hill Country fringe and on modern and ranch-style builds, where its 40-to-70-year life and its light weight, around 100 to 150 pounds per square against 200 or more for asphalt, make it the long-lived choice. A change from shingles to metal at the same pitch is a material change, and the permit and the structure are checked before the work starts.

The details decide the result: high-temperature underlayment, custom-formed flashing, and clips that let the panels move with heat. A shingle-to-metal change can also trigger review where an HOA or a historic district controls the look, so we check that before tear-off. If you want the tile look without tile weight, stone-coated steel is the middle path, and a roof inspection will show whether your deck is ready.

How Our Metal Roof Installation Works

How our metal roof installation works: the same order, every time, so the panels sit on a sound system.

01

Schedule

Call (254) 645-5833 during hours and tell us the age of the roof and what you are seeing. We set a time to inspect, and the inspection covers the deck, the flashing and the ventilation.

02

Diagnose

We inspect every slope, photograph the wear and the flashing, and check the attic side of the deck, so the scope is written from the roof in front of us, not from a general idea.

03

Fix

You get a written scope for the metal roof, naming the panel, the underlayment, the flashing work and the ventilation, so the decision is specific.

04

Finish

We tear off to the deck, rebuild in order, photograph each layer, sweep the yard, and walk the finished roof with you before we leave.

Tools and Methods We Use on Metal Roofing Jobs

Tools & Equipment

Metal brake and shears

On a metal job the metal brake and shears form the panels and the flashing to the roof, cutting and bending the metal so the transitions fit instead of being forced.

Moisture meter

We use the moisture meter on every metal roofing visit, because a deck that looks dry from above can be damp underneath, and a damp deck is the failure that shows up next year.

Seaming tool

The seaming tool closes the standing seams, locking the panels together without exposed fasteners on the field, which is what keeps a metal roof dry for decades.

Chalk line and shingle cutter

On a metal job the chalk line and shingle cutter mark the panel layout and the cuts, so the courses run straight and the seams fall where they should.

Safety harness and roofing ladder

We use the safety harness and roofing ladder on every metal roofing visit, because a metal roof is slicker than shingles and a rushed footing is how a good job turns into a bad day.

Roofing hammer and utility knife

The roofing hammer and utility knife are how we check metal roofing work before it is covered up, so a soft spot or a missed clip is found while it can still be fixed.

Methods & Standards

Extension ladder and roof brackets

On a metal job the extension ladder and roof brackets are how the long panels get to the roof safely, because a bent panel is a panel that has to be remade.

High-temperature underlayment first

For metal roofing, high-temperature underlayment first is what keeps the roof dry through hail season and the next hot summer, because a metal roof runs hotter than shingles.

Cut-to-length panels, fewer joints

We follow cut-to-length panels, fewer joints on metal roofing work, because every joint is a place for water to find, and fewer joints mean fewer leaks.

Custom-formed metal flashing

Custom-formed metal flashing is the rule on every metal job we do in San Antonio, not an upgrade and not an extra: the flashing is formed for the roof, not bought off a shelf.

Clips that let panels move with heat

For metal roofing, clips that let panels move with heat is what keeps the roof quiet and dry, because metal expands and contracts with the temperature and the fastening has to let it.

When Metal Roofing Is the Right Call in San Antonio

01

Your asphalt roof is 15 to 20 years old and you are facing a second replacement.

What we do: We measure the roof by age and wear: an asphalt roof 15 to 20 years old, granule loss across the slopes, and a second replacement coming due. That is the moment to ask whether the next roof should be the last one for a long time.

The homeowner gets a written scope for the metal roofing work, with photos of the worn slopes and the material named, so the decision is specific instead of general.

02

You have hail damage and the insurer has asked for documentation of the roof.

What we do: We mark and photograph the hail damage slope by slope, count the hits, and write a scope that names the damaged slopes, so the documentation matches the roof instead of guessing at it.

The roof is documented, the metal roofing work is scoped, and the homeowner decides with the evidence in hand rather than a guess.

03

Your existing metal roof is leaking and the original installer is gone.

What we do: We trace the leak to the flashing and the fasteners, check the seams and the clips, and name the failure instead of patching the first wet spot.

The homeowner keeps photos of the damage and a written scope for the metal roofing work, so the next step is a decision, not a guess.

04

You are building or adding on and want a roof that will outlast the mortgage.

What we do: We check the structure and the pitch, confirm the house can carry the change, and price the metal roof with the underlayment and the flashing in the open.

The metal roofing scope is written, the photos are in hand, and the homeowner can act on the roof with the evidence in front of them.

How Metal Roofing Works in San Antonio

Metal suits San Antonio because it reflects heat instead of holding it, sheds water fast, and takes hail impacts that would bruise shingles. It is growing fastest on the Hill Country fringe and on modern and ranch-style builds, where the long life is the point.

Neighborhoods We Serve

  • Alamo Ranch

    In Alamo Ranch the metal roofing work follows the neighbourhood: far-west master-planned building from the 1990s onward, where newer large-format roofs are entering their first replacement window.

  • Stone Oak

    Stone Oak is one of the San Antonio neighbourhoods where metal roofing work is shaped by the houses themselves, with 1990s and newer streets and HOA rules that name the material and the colour.

  • Westover Hills

    Westover Hills homes bring their own metal roofing pattern, with far-west master-planned streets where the roofs are newer and larger and the installation is planned around the era.

  • Encino Park

    In Encino Park the metal roofing work follows the neighbourhood: far-north streets along the Bulverde Road corridor, where architectural shingle and tile sit side by side.

  • Thousand Oaks

    Thousand Oaks is one of the San Antonio neighbourhoods where metal roofing work is shaped by the houses themselves, with 1980s streets on their second or third roof.

Local Conditions We Plan For

  • Spring hail season across Bexar County

    When we plan metal roofing work, spring hail season across Bexar County is on the list from the first look, because about 85 percent of the large-hail reports fall in March through May.

  • Summer UV and 100-degree heat

    Summer UV and 100-degree heat shapes how metal roofing work is done in this city: the panels reflect the heat instead of holding it, and the underlayment is rated for the temperature.

  • Design wind speed of 108 mph

    Design wind speed of 108 mph is part of every metal job here, and the clips and the fastening are set to the adopted code, not to habit.

  • Expansive clay soils

    When we plan metal roofing work, expansive clay soils is on the list from the first look, because the ground swells wet and shrinks dry, the frame moves, and the flashing and the joints take the movement.

Hail-Damaged Asphalt to Standing Seam

Before

An 18-year-old architectural shingle roof with hail bruising across every slope, granule loss in the gutters, and a stain that had appeared after the last heavy rain.

After

We tore off to the deck, replaced the soft sheets, and installed standing-seam metal panels with high-temperature underlayment and custom-formed flashing.

Maintenance: We recommend a spring inspection after hail season and checking the ridge and flashing after any storm that drops hail you can see on the ground.

Before

A Stone Oak home with loose or backed-out fasteners on a roof that had not been looked at in years, with a leak that showed up after every heavy rain.

After

We inspected the roof slope by slope, fixed the loose or backed-out fasteners at its source as part of the metal roofing work, and photographed the repair before we left.

Maintenance: We recommend a metal roofing check each spring after hail season, and keeping valleys clear of oak leaves so water runs off instead of sitting.

Before

A Westover Hills home where hail-dented panels and cracked sealant had been patched twice without fixing the entry point, and the stain kept coming back.

After

We tracked the leak to its source, completed the metal roofing repair at the entry point, verified it by running water across the area, and photographed the finished repair.

Maintenance: We recommend checking the repaired detail each spring, since heat and hail work on the same spots year after year.

Metal Roof Problems We Solve in San Antonio

Metal roofs fail at the transitions first, and the transitions are where a metal job is judged: the flashing, the fasteners, the seams, and the ridge.

Problem

Leaking at chimney and skylight flashing

Leaking at chimney and skylight flashing usually means the flashing was formed for shingles instead of metal, or the sealant gave up while the metal was still sound.

Our Fix

We fix the cause of the leaking at chimney and skylight flashing by forming new metal flashing for the transitions, not by resealing what has already failed.

Problem

Loose or backed-out fasteners

Loose or backed-out fasteners are the most common metal roof failure, because the panels move with the heat and the fasteners work loose over thousands of cycles.

Our Fix

We replace the loose or backed-out fasteners and check the clips, so the panels can move with the heat without working the fastening loose again.

Problem

Hail-dented panels and cracked sealant

Hail-dented panels and cracked sealant travel together: the hail dents the panel, the sealant cracks at the dent, and the water finds the crack.

Our Fix

The fix for hail-dented panels and cracked sealant is to replace the dented panels and the sealant together, because a new panel over cracked sealant is a leak waiting for rain.

Problem

Wind-lifted panels and ridge caps

Wind-lifted panels and ridge caps happen when the clips or the fastening have failed, and the lifted panels around the bare patch are the next ones to go.

Our Fix

We fix the cause of the wind-lifted panels and ridge caps and photograph the repair, then check the slopes around it for the same failure.

Problem

Water backing under the roof edge

Water backing under the roof edge happens when the drainage path is blocked or the edge flashing has failed, and it wets the deck from below instead of above.

Our Fix

The fix for water backing under the roof edge is to open the drainage path and repair the edge flashing, then check the deck underneath for soft spots before the finish goes back on.

Stone-coated steel roof in a tile profile

Why San Antonio Homeowners Choose Metal

Metal reflects heat, sheds water fast, and takes hail that would end a shingle roof. It costs more to install than shingles and lasts longer, which is the trade to weigh. If you want the tile look in steel, see stone-coated steel roofing.

  • Heat reflected, not absorbed

    With metal roofing, heat reflected, not absorbed is the difference between a roof that cooks the attic and a roof that sheds the summer sun, which is why the panels are light in colour and the underlayment is rated for the heat.

  • No exposed fasteners on the field

    No exposed fasteners on the field is one of the reasons homeowners choose our metal roofing work, because the standing seams lock the panels together and the field has nothing to work loose.

  • Hail dents, not bruises

    Hail dents, not bruises is built into the metal roofing work, not added on top of it: a hailstone that would bruise a shingle mat dents a metal panel, and the panel keeps shedding water.

  • Panels cut to length for the roof

    With metal roofing, panels cut to length for the roof is the difference between a roof with a few joints and a roof with many, and fewer joints mean fewer places for water to find.

What to Know Before You Hire a Roofer for Metal Roofing in San Antonio

What to Check Before You Hire

  • Texas does not issue a statewide roofing licence; the City of San Antonio requires contractor registration for re-roof permits.
  • Standing-seam metal sheds San Antonio's short, heavy downpours well, but the seams, clips and flashing details decide whether it stays quiet and dry in a windstorm.
  • Metal expands and contracts in August heat, so fasteners and clips need room to move. A rigid install works loose over time.
  • A metal roof over an old shingle roof is not a shortcut around decking problems. The deck still needs to be sound underneath.
  • Kbron Roofing is at 6 Irongate Creek, San Antonio, TX 78238, open Monday to Saturday, 6 AM to 8 PM, closed Sunday. Call (254) 645-5833 during hours.

Google Reviews

Kbron Roofing holds 5.0 out of 5 from 18 Google reviews, all 5-star. Reviewers name Rene Vargas as their contact and describe honest, no-pressure service. Read short verbatim excerpts from those reviews in the Metal Roofing testimonials below.

Metal Roofing Experience You Can Check

We install standing-seam metal across Bexar County, from full re-roofs to additions, and we show you the deck before we cover it. Call (254) 645-5833 during hours.

  • Standing-seam panels installed with clips that let them move with heat
  • High-temperature underlayment and custom-formed metal flashing
  • City re-roof permit pulled on every replacement, as San Antonio requires
  • Shingle-to-metal changes checked against HOA and historic rules before tear-off
  • 5.0 out of 5 from 18 Google reviews, all 5-star
Call (254) 645-5833
Chimney flashing on a shingle roof

What San Antonio Homeowners Say About Metal Roofing

Short verbatim excerpts from Google reviews by customers who chose our metal roofing work. All five readable reviewers gave 5 stars two months ago; three are quoted below.

"Rene is incredibly honest, hardworking, and dedicated to his customers. He takes the time to truly understand your needs and delivers quality work and results at a price that won't break your wallet."

J

Joe Favor

★★★★★ · Homeowner, San Antonio · 2 months ago · Roof inspection, roof installation, storm and wind repair

"He was so professional, walked me through the steps of how to make a claim with my insurance, and the whole process was super simple. The roof was installed in just one day, and the crew was incredibly clean and professional."

D

Donnovan Smith

★★★★★ · Homeowner, San Antonio · 2 months ago · Storm and wind repair, roof installation

"He worked with my insurance and made it so easy. Definitely recommend them to anyone, just hear them out because I am very glad I did."

J

Joshua Garza

★★★★★ · Homeowner, San Antonio · 2 months ago · Storm and wind repair, roof installation

Frequently Asked Questions About Metal Roofing

Real answers to the questions we hear most often about metal roofing in San Antonio, including whether a shingle roof can change to metal.

Can a shingle roof be changed to metal?
Usually yes. At roughly 100 to 150 pounds per square, standing-seam metal is far lighter than tile, so most shingle roofs can carry it. We check the deck first, and we check HOA or historic rules where they control the look.
Does metal roofing dent in hail?
Hail can dent metal, and 24-gauge panels stand up to it better than thinner ones. Unlike shingles, a dent does not usually open a path for water, but we photograph and document any hail damage for your insurer or adjuster.
Is a metal roof hotter in summer?
No. Metal reflects heat rather than absorbing it, and with balanced ventilation the attic stays cooler than under an old shingle roof. High-temperature underlayment goes under the panels because metal runs hotter in direct sun.
Do I need a permit for a metal roof in San Antonio?
Yes. The City of San Antonio requires a re-roof permit on any replacement. Our permits and codes page explains the fee and the process.
How long does a metal roof last?
Longer than shingles, and the exact life depends on the panel gauge, the coating, the flashing and the maintenance. The panels outlast the sealant and the flashing details, which is why those get checked at every inspection.

Get a Straight Answer on Metal Roofing in San Antonio

Call (254) 645-5833 and we will inspect the deck for a change to metal, photograph what we find, and give you a written scope. Monday to Saturday, 6 AM to 8 PM.

Call Now Schedule Call for an Estimate

Contact Kbron Roofing

Call us at (254) 645-5833 or send a message and we will get back to you during business hours. We schedule metal work Monday to Saturday, 6 AM to 8 PM.

Or call us right now at (254) 645-5833 — we answer.

Kbron Roofing


  • Address

    6 Irongate Creek, San Antonio, TX 78238, United States, San Antonio, Texas

  • Hours

    Mon–Sat: 6 AM – 8 PM

Call (254) 645-5833 Get Quote
Call Quote