UL 2218 Class 4 Shingles
UL 2218 Class 4 shingles are tested against a steel ball dropped from height, and the rating is the test, not a marketing word: the shingle that passes it is built to take the hail this city gets.
Class 4 shingles are the hail-belt upgrade for a shingle roof, and they are installed as a system: the deck, the underlayment, the flashing and the ventilation, with the impact-rated shingle as the finish.
UL 2218 Class 4 shingles are tested against a steel ball dropped from height, and the rating is the test, not a marketing word: the shingle that passes it is built to take the hail this city gets.
The old roof comes off in full and is hauled away, down to the deck, because a Class 4 roof over two old layers is not an installation at all.
Synthetic underlayment goes across the whole deck before any shingle goes down, giving the roof a continuous water-shedding layer underneath the finish.
New flashing and boots go in at every penetration, chimney, wall and valley, because the flashing is where a shingle roof most often starts leaking.
Balanced ventilation is part of the installation, so the attic breathes and the new shingles are not cooked from below.
The final walk-through and photos close the job: the finished roof is walked with you, and the photos show the work, layer by layer.
Class 4 impact-resistant shingles really involve the test and the law, not just the shingle. UL 2218 is the impact test, and Texas Property Code section 202.011 protects shingles designed to be wind- and hail-resistant from HOA bans, as long as they resemble the shingles the subdivision allows and match the look of the surrounding homes. The discount question is insurer-set and company by company, so the page names no percentage: ask your carrier what it allows for an impact-rated roof.
Two things to know before you choose. First, any insurance discount for Class 4 shingles is set by your insurer, company by company, so ask your insurer directly; we do not quote a percentage, because there is no single one. Second, Texas law protects your right to install hail-resistant shingles even where an HOA would rather you did not, though the HOA can still control colour and look. Our HOA approval help page explains the process, and standard architectural shingles are the comparison point.
How our Class 4 shingle installation works: the same order as any shingle roof, with the impact-rated finish as the last layer.
Schedule
Call (254) 645-5833 during hours and tell us the age of the roof and what you are seeing: hail bruising, granule loss, a roof that has been bruised more than once. We set a time to inspect.
Diagnose
We inspect every slope, photograph the wear and the flashing, and check the attic side of the deck, so the scope is written from the roof in front of us.
Fix
You get a written scope for the Class 4 roof, naming the material, the underlayment, the flashing work and the ventilation, so the decision is specific.
Finish
We tear off to the deck, rebuild in order, photograph each layer, sweep the yard, and walk the finished roof with you before we leave.
Roofing nail gun
The roofing nail gun is how we check Class 4 shingle work before it is covered up, so a soft spot or a missed nail is found while it can still be fixed.
Moisture meter
On a Class 4 job the moisture meter earns its keep on the first slope, reading the deck before we trust our eyes.
Chalk line and shingle cutter
We use the chalk line and shingle cutter on every Class 4 visit, because a straight course and a clean cut are what make a new roof shed water evenly.
Pry bar and roofing hammer
The pry bar and roofing hammer are how we check Class 4 shingle work before it is covered up, opening the old layers to see the deck beneath.
Safety harness and roofing ladder
On a Class 4 job the safety harness and roofing ladder earn their keep on the first slope, because a steep pitch is worked without rushing or not at all.
Roofing hammer and utility knife
We use the roofing hammer and utility knife on every Class 4 visit for the cuts and the fastening the nail gun cannot reach, at hips, ridges and penetrations.
Sealed starter course
Sealed starter course is the rule on every Class 4 job we do in San Antonio: the first course is sealed at the eave, because wind gets under a roof at the edge first.
Manufacturer-spec nailing pattern
For Class 4 shingles, the manufacturer-spec nailing pattern is what keeps the roof dry through hail season and the next hot summer, with the fastener count the pattern calls for at 108 mph design wind.
Synthetic underlayment across the deck
We follow synthetic underlayment across the deck on Class 4 work, so the roof has a continuous layer under the finish for the rain that gets past it.
Balanced ventilation design
Balanced ventilation design is the rule on every Class 4 job we do in San Antonio: ridge exhaust matched to soffit intake, so the attic moves air instead of storing heat.
01
What we do: We walk the roof slope by slope, mark and photograph the hail hits, and count the bruising, because a roof that was bruised by hail and patched is a roof that will bruise again.
The homeowner gets a written scope for the Class 4 shingle work, with photos of the bruising and a clear statement of what the storm did and what it did not.
02
What we do: We read the insurer's question with you and answer it from the roof: the shingle is UL 2218 Class 4, the rating is the test, and the documentation names it.
The roof is documented, the Class 4 shingle work is scoped, and the homeowner decides with the evidence in hand rather than a guess.
03
What we do: We measure the roof by age and wear: a 15-to-20-year-old shingle roof, granule loss across the slopes, and the longest-lived shingle option as the next roof.
The homeowner keeps photos of the damage and a written scope for the Class 4 shingle work, so the next step is a decision, not a guess.
04
What we do: We read the HOA's question with you, name the shingle and the colour, and explain the protection Texas law gives hail-resistant shingles that match the subdivision's look.
The Class 4 shingle scope is written, the photos are in hand, and the homeowner can act on the roof with the evidence in front of them.
San Antonio is hail country: 85 percent of large-hail reports fall in March through May, and the two storms every roofer remembers are 12 April 2016 and 3 May 2021. A Class 4 roof is the answer to that calendar, not to one storm.
Stone Oak
Stone Oak homes bring their own Class 4 shingle pattern, with 1990s and newer streets, tile-heavy blocks beside architectural shingle ones, and HOA rules that name the material and the colour.
Thousand Oaks
In Thousand Oaks the Class 4 shingle work follows the neighbourhood: 1980s streets on their second or third roof, where the decision is usually about age, not about one storm.
Westover Hills
Westover Hills is one of the San Antonio neighbourhoods where Class 4 shingle work is shaped by the houses themselves, with far-west master-planned streets where the roofs are newer and larger.
Encino Park
Encino Park homes bring their own Class 4 shingle pattern, with far-north streets along the Bulverde Road corridor, where architectural shingle and tile sit side by side.
Alamo Ranch
In Alamo Ranch the Class 4 shingle work follows the neighbourhood: far-west master-planned building from the 1990s onward, where newer large-format roofs are entering their first replacement window.
Spring hail season, March through May
Spring hail season, March through May, is part of every Class 4 job here, because about 85 percent of the large-hail reports fall in those three months.
85 percent of large-hail reports fall in March through May
When we plan Class 4 shingle work, 85 percent of large-hail reports fall in March to May is on the list from the first look, because the hail season is short and the roof has to take it.
Summer UV and 100-degree heat
Summer UV and 100-degree heat shapes how Class 4 shingle work is done in this city: the granule loss is read slope by slope, with the south and west slopes ageing first.
South and west slopes age first
South and west slopes age first is part of every Class 4 job here, because the afternoon sun is the fastest ageing force on a San Antonio roof.
Class 4 shingles solve the hail problem, and the problems they address are the ones a standard shingle roof keeps having, season after season.
Problem
Hail bruising on standard shingles breaks the mat, and the granule loss that follows lets UV at the asphalt, which is how a bruise becomes a leak a season or two later.
Our Fix
We replace the hail bruising on standard shingles with Class 4 impact-rated shingles, so the next hail season meets a roof that is built for it.
Problem
Granule loss after every hail season is the visible clock of a standard shingle roof in this city, and it shows first on the south and west slopes.
Our Fix
The fix for granule loss after every hail season is to address the worn slopes with a shingle that is tested to a higher standard, not to wash the roof.
Problem
Repeat hail claims on the same roof usually mean the roof is a standard shingle roof in hail country, and the next roof is the moment to change the shingle, not just the scope.
Our Fix
We document the repeat hail claims on the same roof slope by slope, so the Class 4 scope names the damage while it is still small.
Problem
Flashing and vents dented by hail are the damage most often missed, because the shingles get the attention and the flashing gets a glance, and a dented vent is a leak waiting for rain.
Our Fix
We check the flashing and vents dented by hail on every Class 4 job, and the scope names what is dented and what is sound.
A Class 4 roof is still a shingle roof, so it installs like one and looks like one, but the mat underneath is built to take hail. The upgrade costs more than standard shingles and pays back over the hail seasons that follow. Compare standard architectural shingles before you decide.
UL 2218 Class 4 rating
UL 2218 Class 4 rating is built into the Class 4 impact-resistant shingle work, not added on top of it: the rating is the test, and the test is what the shingle is built to pass.
A stronger mat under the granules
With Class 4 impact-resistant shingles, a stronger mat under the granules is the difference between a roof that bruises in April and a roof that takes the hail and keeps shedding water.
The same look as standard shingles
The same look as standard shingles is one of the reasons homeowners choose our Class 4 shingle work, because the roof looks like the street it stands on and the HOA protection covers it.
New flashing at every detail
New flashing at every detail is built into the Class 4 impact-resistant shingle work, not added on top of it, because the flashing is where most roofs fail and the part a shortcut leaves behind.
Kbron Roofing holds 5.0 out of 5 from 18 Google reviews, all 5-star. Reviewers name Rene Vargas as their contact and describe honest, no-pressure service. Read short verbatim excerpts from those reviews in the Class 4 Impact-Resistant Shingles testimonials below.
We install Class 4 shingles across San Antonio, from full re-roofs to hail replacements, and we show you the deck before we cover it. Call (254) 645-5833 during hours.
Short verbatim excerpts from Google reviews by customers who chose our class 4 impact-resistant shingles work. All five readable reviewers gave 5 stars two months ago; three are quoted below.
"He was so professional, walked me through the steps of how to make a claim with my insurance, and the whole process was super simple. The roof was installed in just one day, and the crew was incredibly clean and professional."
Donnovan Smith
★★★★★ · Homeowner, San Antonio · 2 months ago · Storm and wind repair, roof installation
"He worked with my insurance and made it so easy. Definitely recommend them to anyone, just hear them out because I am very glad I did."
Joshua Garza
★★★★★ · Homeowner, San Antonio · 2 months ago · Storm and wind repair, roof installation
"Rene took a genuine, zero-pressure approach. He is remarkably honest, transparent, and truly puts the customer's best interest first."
Imanii Roberson
★★★★★ · Homeowner, San Antonio · 2 months ago · Roof repair for storm and wind damage
Real answers to the questions we hear most often about Class 4 shingles in San Antonio, including what the rating means and what an HOA can do.
Shingle Roofing pairs with class 4 impact resistant shingles on many San Antonio homes, and the two scopes are written together so nothing is missed.
View Shingle RoofingWhere class 4 impact resistant shingles work raises a question, hail damage roof repair is often the answer, and we scope it in the same visit.
View Hail Damage Roof RepairRoof Replacement is the natural next step after class 4 impact resistant shingles on a roof that needs more than one kind of attention.
View Roof ReplacementHOA Approval Help pairs with class 4 impact resistant shingles on many San Antonio homes, and the two scopes are written together so nothing is missed.
View HOA Approval HelpWhere class 4 impact resistant shingles work raises a question, roof inspection is often the answer, and we scope it in the same visit.
View Roof InspectionInsurance Claims Help is the natural next step after class 4 impact resistant shingles on a roof that needs more than one kind of attention.
View Insurance Claims HelpCall us at (254) 645-5833 or send a message and we will get back to you during business hours. We schedule Class 4 work Monday to Saturday, 6 AM to 8 PM.
Phone
(254) 645-5833Address
6 Irongate Creek, San Antonio, TX 78238, United States, San Antonio, Texas
Hours
Mon–Sat: 6 AM – 8 PM